Recent posts

Tampilkan postingan dengan label lambreta. Tampilkan semua postingan

Innocenti Scooters

October 1969 saw the TV 2 has introduced Innocenti scooters marketed as the "sports scooter". Style is based on the end of the Li series 1, but with some changes. A hull reworked, now made a new shot with the direction of light, and floor mats instead of the runners were the major differences. All TVs come with a standard double seat, with a choice of two stools. Changes in production were half of the backlight back style first found in the first television series, offering greater lighting zone last. Again, depending on the model of the first series, the first examples of the second set kept the door round horn, with which after moving to a larger grille, pear-shaped horns. Forks were selected from the first series, and has a color code printing. The front brake has been upgraded to one of the options presented on the disc, but always with drum brakes.


An interesting aspect of the second TV series, was apparently the same power increase, which highlighted the weakness of the body. Alloy Steel are some examples very soon began to break. Innocent recalled all models, and it has been discontinued. Innocent response was to cut the side frame, welded to the flat plate, and then weld the frame back together, which improves the strength. This decision is now behind us, it was very strange, most must have cost a lot of money to implement these changes Innocents, would scrap boxes and start again. When all the current framework was changed, Innocenti better resistance of the frames, making them thicker gauge tube. Chassis numbers in two TV series, appeared in two groups, whose first version was mainly those who needed to change was one, thick successive frames started 2

Now the engine crankshaft 58 mm Stoke, but with a 117mm stem length of 108 mm Li barrel coated with a different and piston. Gone are the awkward arrangement of the first round trip, to be replaced by a single piston, which engaged the first gear teeth. Carburetion is further reduced in size to 21 mm in the afternoon, from the earliest examples of 23mm. Production was still 8.6bhp claimed, with a maximum speed of 65 mph!

The badging on television had the same time "Lambretta wheel cover," as the models of Li, but large plate screws TV175 below. Shields had a leg shield in the center of the horn casting, which hid two screws to help ensure the distribution of the horn, and badge clip. Shields on the stretch placed a thin chrome Lambretta badge, the flagship model TV175 then re-chrome. UK models also gained a round copper plate with St. George the dragon on it. All rubbers and trim, was gray, with control cables, except the following: - The rubber feet were black and standing kick, the joint was white rear lights

Again, as in the sister model, the Li, the television series was the second ten pounds more expensive than the series it replaced, which helped sales to compete. The color choices are Ivory, light blue, and some two-tone yellow or gray, with the second dominant color of the side panels in blue or red and horns. When production stopped in November 1961 over 34,000 examples were built.

SPECIFICATION

Length : 1930mm
Width: 710mm
Height : 1060mm
Weight : 115kg
Capacity : 175cc
Bore : 62mm
Stroke : 58mm
Power : 8.6hp @ 6,000 rpm
Max speed 65mph
Fuel Consumption 123 mpg




Colours : Ivory (8028), Blue (8042)
Frame Numbers : Prefix was 175TV2. Although there were only 34,928 TV175 models manufactured their frame numbers are in two distinct groups. Early models, and these include those with the reinforced frame tube, have frame numbers commencing 1 ....... and later models have frame numbers commencing 2.
Engine Numbers : 175TV2
Carburettor Dell'Orto MB 23 BS5 early
MB21BS7 late
Tyre Size 3.50*10
Ft pressure 18 lb/sq.in
R pressure 28 lb/sq.in

Model F


"F" model was very similar in design to his sister before, the E, with the only difference from the "F" had a kick. Again, the CF share part of the E-shaped model, with built in fuel tank toolbox under the seat and back Butty Box. The F was introduced in March 1954 and had a production run that lasted until April 1955. It should be noted that the model F 32,701, none have been imported to Britain.

Torsion bar suspension at the rear air-cooled engine directly, they have other features, with standard side stand, a center stand has been proposed as an option. Money-saving features such as brake drums made of pressed steel instead of cast iron, found their way into the model F. Half of the production cycle, the second version appeared, bearing holders similar to model D. The F model is available in a variety of paint schemes including gray, alabaster, porcelain blue, brown, white and brown and was available in various forms throughout his life.
SPECIFIC 
Length : 1760mm
 Width: 660mm 
Height : 950mm 
Weight : 60kg
 Capacity : 123cc 
Bore : 52mm 
Stroke : 58mm 
 Power : 3.8hp @ 4,500
 rpm Max speed 44mph
 Fuel Consumption 169 mpg

Colours : Grey(8012), Beige (8029, China Blue, Brown, Off White and Maroon
Frame Numbers :
Engine Numbers : Not Known
Carburettor Dell'Orto MU14 C1
Tyre Size 4.00*8
Ft pressure 16 lb/sq.in
R pressure 24 lb/sq.in